Industrial Area Phase 1 & 2, Chandigarh - 160002 info@steelworks.in Mon–Sat, 9:00 AM – 7:30 PM +91 98785 25080
Get a QuoteQuote
Motorized-ready geometric sliding steel gate

Steel Gates

Modern Geometric Sliding Steel Gate

A heavy sliding gate with laser-cut geometric louvers, built in Chandigarh and prepared for a motor.

Request a Quote All products

A gate sized to the driveway, not a stock leaf.

The Modern Geometric Sliding Steel Gate is a heavy-duty, motorized-ready entrance gate. The face is laser-cut into a geometric louver, so the leaf reads as a pattern from the road and still closes the opening. Leaf length, height, and track line are taken from a laser measure of the site, then fabricated at the Industrial Area workshop.

The frame and infill are IS 2062 mild steel. After fabrication the steel is zinc phosphated and finished with an AkzoNobel powder coat at about 80 microns, so the geometric cut edges stay protected outdoors. The workshop fits the gate on site across Chandigarh, Mohali, Panchkula, Zirakpur, Kharar, and the wider Punjab and Haryana region. The leaf is prepared for a motor; the drive itself is confirmed when the opening and power point are known.

SS-304 balcony railing with clear toughened glass

Steel Railings

SS-304 Balcony Railing with Toughened Glass

A slotted stainless balustrade with 12mm clear glass for balconies and terraces.

Request a Quote All products

Glass in a stainless line, fixed to the slab you already have.

This balcony railing uses Jindal SS-304 in a slotted balustrade, with 12mm clear toughened glass held in the channel. It is made for balconies and terraces where the view matters and the edge still has to take daily load. Posts, glass length, and corner turns follow a laser measure of the slab edge, so the line stays straight from one end of the balcony to the other.

The finish is stainless, not a painted coat. The Chandigarh workshop fabricates the posts and channels, then the crew fixes them on site with Hilti anchors. Runs are quoted for homes and terraces in Chandigarh, Mohali, Panchkula, Zirakpur, and Kharar. Where a terrace needs marine-grade stainless, the workshop can specify SS-316 instead of SS-304.

Oversized contemporary steel pivot entrance door with teak accents

Steel Doors & Windows

Contemporary Pivot Steel Entrance Door

An oversized steel pivot door with thermal insulation, a lock provision, and teak accents.

Request a Quote All products

One leaf, pivoted, for an entrance that is larger than a standard frame.

The Contemporary Pivot Steel Entrance Door is an oversized heavy steel leaf that turns on a pivot instead of side hinges. The leaf includes thermal insulation, a provision for a biometric digital lock, and teak timber accents set into the steel face. Height, width, and pivot position are set from the finished opening, so the door is made for that entrance rather than cut down from a stock size.

Mild steel is welded in the Chandigarh workshop, then powder coated. The teak is an accent, not the structure. The crew fits the pivot and the frame on site. Share the opening size and whether the lock is already chosen, and the quote covers fabrication and fitting in Chandigarh and the neighbouring cities.

Prefabricated steel portal frame and roof truss

Structural Steel

Industrial Portal Frame & Truss

Prefabricated frames and roof trusses for warehouses, workshops, and commercial halls.

Request a Quote All products

The building frame, cut in the workshop and stood up on your plot.

The Industrial Structural Steel Portal Frame & Truss is a prefabricated building frame: columns, rafters, and roof trusses for warehouses, workshops, and commercial halls. Members are IS 2062 mill steel. Bay width, height, and truss profile are set from the drawing and a site measure, then the pieces are drilled and welded in Chandigarh so erection on site is assembly rather than fabrication.

The same workshop that builds gates and stairs erects these frames, including sheds in Industrial Area Phase 1. Finish, if the steel is left exposed, is the workshop’s zinc phosphate and AkzoNobel powder coat. Share the span, eave height, and whether the frame is a warehouse, a workshop, or a hall, and the quote follows that layout.

CNC laser-cut decorative steel jali on a building facade

Laser-Cut & Decor

CNC Laser-Cut Facade & Jali

Fiber-laser panels in mild steel or stainless for elevations, boundary walls, and screens.

Request a Quote All products

A pattern cut through the sheet, then fixed to the building.

The CNC Laser-Cut Steel Architectural Facade & Jali is a set of decorative panels cut on the workshop’s 6kW fiber laser. The same process covers building elevations, boundary walls, courtyard jalis, and privacy partitions. Patterns are cut in mild steel or stainless, in panels sized to the wall or the opening so the joints land on the structure behind them.

Mild steel panels are zinc phosphated and powder coated with AkzoNobel at about 80 microns. Stainless panels stay a metal finish. The Chandigarh crew fits the screens on site. Send the elevation or the wall length, and whether the screen is MS or stainless, for a made-to-order quote.

Cantilever floating steel staircase with hardwood treads

Industrial & Staircases

Cantilever Floating Steel Staircase

A mono-stringer or cantilever stair with a box-beam spine and hardwood or steel treads.

Request a Quote All products

The spine is the structure. The treads read as a line.

The Industrial Cantilever Floating Steel Staircase is a mono-stringer or a true cantilever, built around a heavy box-beam spine. Treads are solid hardwood or steel trays. Rise, going, and the turn at the landing are set from the floor-to-floor height and the well, measured on site before the spine is cut.

The stair is engineered, fabricated, and fitted from the Chandigarh workshop. Mild steel is powder coated after zinc phosphate. Fixings into concrete use Hilti anchors. It suits homes and commercial floors in Chandigarh and across Mohali, Panchkula, Zirakpur, and Kharar. The quote needs the floor height, the well width, and whether the treads are timber or steel.

Heavy mild steel double swing gate with anti-climb spikes

Steel Gates

Heavy-Duty MS Double Swing Gate

A double-leaf swing gate with ball-bearing hinges, anti-climb spikes, and a padlock housing.

Request a Quote All products

Two leaves, hinged, for yards that do not have a sliding run.

The Heavy-Duty Industrial MS Double Swing Gate is a pair of leaves on heavy ball-bearing pivot hinges. The top carries anti-climb spikes, and the meeting stile has a padlock security housing. It is the gate for an opening where a sliding track will not fit: a factory yard, a side entrance, or a boundary where the leaf has to swing in or out.

The steel is IS 2062 mild steel, fabricated in Chandigarh, zinc phosphated, and powder coated. Hinge posts are set on site to the measured opening so the leaves meet without a gap at the lock. The workshop fits gates of this type across Chandigarh and into Mohali, Panchkula, Zirakpur, Kharar, and Ludhiana.

French-grid mild steel and glass loft partition door

Steel Doors & Windows

French Style Steel & Glass Loft Door

A slim steel frame with a French glass grid for cabins, studies, and living rooms.

Request a Quote All products

A thin steel grid that divides a room without closing it off.

The French Style Mild Steel & Glass Loft Partition Door is a slimline steel frame with a French grid of glass. It is made for office cabins, study rooms, and modern living zones where the partition has to mark a room and still pass light. The grid, the leaf width, and whether it is a single door or a door-plus-sidelight are set from the opening.

The frame is fabricated in Chandigarh and fitted on site. Mild steel is powder coated after zinc phosphate so the slim bars stay even in colour. Glass is held in the grid, not stuck on as a sheet. Send the opening width and height, and the room it is for, and the quote covers the frame, the grid, and the fitting.

In the workshop

Measured, cut, and fitted from Chandigarh.

  1. 01

    Measure

    A laser measure of the opening, the levels, and the fixing points before any steel is cut.

  2. 02

    Cut

    Sheet and jali work on the 6kW fiber laser. Frames, gates, and stairs from mill sections.

  3. 03

    Weld

    MIG and TIG in the Industrial Area workshop, on IS 2062 mild steel or stainless.

  4. 04

    Finish

    Mild steel is zinc phosphated, then powder coated with AkzoNobel at about 80 microns. Stainless stays SS-304, or marine SS-316 where that grade is specified.

  5. 05

    Fit

    Hilti anchors and the workshop crew, across Chandigarh, Mohali, Panchkula, Zirakpur, Kharar, Ludhiana, Punjab, and Haryana.

Products

Choose a product to read.

Each piece is made to order in Chandigarh. Open a page for the description, the specification, and a quote.